tower dryers

The drying process is divided into 4 stages corresponding to a single operating configuration of the machine:
1. LOADING
2. DRYING
3. COOLING
4. DISCHARGE

The products enters still wet and after going through the machine from the top to the bottom, it is dried and cooled.
The recovered heat from the grain during the cooling phase significantly reduces fuel consumption.
The corn is subject to a progressive decrease of the temperature, so that the grain does not receive any damage by sudden temperature changes, thus arriving in the discharge zone perfectly cleaned and cooled at room temperature.
Now it can be stored without any problem and in absolute safety.

RT series

model (ton/24h)
RT 150/7 200
RT 175/8 232
RT 200/9 260
RT 225/10 288
RT 250/11 316
RT 275/12 344

RM series

model (ton/24h)
RM 150/9 288
RM 200/11 384
RM 250/13 480
RM 300/16 560
RM 350/19 680
RM 400/21 760

RG series

model (ton/24h)
RG 400/14 840
RG 500/16 960
RG 600/18 1200
RG 700/20 1320
RG 800/22 1440

 

The indicated productions are calculated according to a mathematical model by assuming the product is clean, ripe and under normal operating conditions. For further details, contact your nearest Mecmar dealer. Based on our continuous improvement policy, we reserve the right to change specifications without prior notice.

The photos presented are only meant for informative purposes and if there are no photos of the described model on the page, photos of similar machines of the same series were used. Please do not hesitate to contact us for more details on the machines shown.